UCC37322DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 650mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | UCC37322 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 9A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 650mW |
| Output Current | 9A |
| Max Supply Current | 1mA |
| Propagation Delay | 70 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 70 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 70ns |
| Fall Time (Typ) | 30 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.07 µs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1.1V 2.7V |
| Turn Off Time | 0.07 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC37322DG4 Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.There is a package in the form of Tube.Surface Mount is mounted in the way.A supply voltage of 4V~15V demonstrates its superiority.A gate type of N-Channel, P-Channel MOSFET is used in its design.There is a temperature range for this device of 0°C~70°C TA.Input type of Non-Inverting is used.8 terminations constitute its foundation.Numerous related parts can be found under its base part number UCC37322.Mosfet driver is mounted using the Surface Mount method.Mosfet driver is configured wMosfet driverh 8 pins when designing.A supply voltage of 14V is required for operation.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.Mosfet driver is possible for the output current to be as low as 9A.Several electronic components are included in its subcategory of MOSFET Drivers.A board with 8 component pins is available.The basis of this system consists of 1 outputs.This device supports a current output of 9A at the output.Its maximum power dissipation of 650mW shows its power loss capacity without overheating.If you want a stable supply current, you should keep it at 1mA.
UCC37322DG4 Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 650mW
UCC37322DG4 Applications
There are a lot of Texas Instruments UCC37322DG4 gate drivers applications.
- Industrial motor drives - compact, standard, premium, servo drives
- Portable Navigation Devices
- Commercial and agricultural vehicles (CAV)
- Dual-Battery Systems
- Isolated switch mode power supplies (SMPS)
- Motor Controls
- Telecom switch mode power supplies
- High-speed communications
- Automotive Applications
- Smart Phones
