UCC37322DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 650mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | UCC37322 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 9A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 650mW |
| Output Current | 9A |
| Max Supply Current | 1mA |
| Propagation Delay | 70 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 70 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 70ns |
| Fall Time (Typ) | 30 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.07 µs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1.1V 2.7V |
| Turn Off Time | 0.07 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC37322DR Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tape & Reel (TR) is the form of the package.Surface Mount is mounted in the way of the device.When the supply voltage is set to 4V~15V, it can demonstrate its superiority.This gate type has a N-Channel, P-Channel MOSFET design.The allowable temperature range that this device can be operated in is 0°C~70°C TA.A type of Non-Inverting is used for input in this program.Mosfet driver is based on 8 terminations.Numerous related parts are available for its base part number UCC37322.The mount method is Surface Mount.As a result, it is configured with 8 pins when it is designed.A supply voltage of 14V is required for operation.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.In the maximum case, the output current can be limited to 9A.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.On the board, there are 8 component pins.The basis of this system consists of 1 outputs.9A is the maximum output current supported by the device.650mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.To ensure high stability, the supply current should be kept at 1mA.
UCC37322DR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 650mW
UCC37322DR Applications
There are a lot of Texas Instruments UCC37322DR gate drivers applications.
- serial peripheral interface (SPI), I2C
- A/D drivers
- AC-DC Inverters
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Dual-Battery Systems
- PCMCIA applications
- Digitally controlled power supplies
- Welding
- High-speed communications
- High power buffers
