UCC37322P
| Parameters | |
|---|---|
| Output Characteristics | TOTEM-POLE |
| Rise Time | 70ns |
| Fall Time (Typ) | 30 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.07 µs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1.1V 2.7V |
| Turn Off Time | 0.07 µs |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 350mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.54mm |
| Base Part Number | UCC37322 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 150mV |
| Max Output Current | 9A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 350mW |
| Output Current | 9A |
| Max Supply Current | 1mA |
| Propagation Delay | 70 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 70 ns |
UCC37322P Overview
For greater flexibility, its 8-DIP (0.300, 7.62mm) package is used.Tube represents the package.In the direction of Through Hole, gate drivers is mounted.Using a 4V~15V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.This device is designed with a N-Channel, P-Channel MOSFET gate type.In this device, temperatures must not exceed 0°C~70°C TA.The input type is Non-Inverting.The configuration is based on 8 terminations.Many related parts can be found under its base part number UCC37322.Mounting the device requires Through Hole.When the device is designed, it has 8 pins.This device operates with 14V supply voltage.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.9A is the maximum output current.Its subcategory of MOSFET Drivers contains various useful electronic components.A board with 8 component pins is available.The basis has 1 integrated outputs.Mosfet gate drivers supports a current output of 9A.Using 350mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.For higher stability, the supply current should be kept at 1mA.As a result, a voltage of 150mV is produced.
UCC37322P Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 350mW
UCC37322P Applications
There are a lot of Texas Instruments UCC37322P gate drivers applications.
- Smart Phones
- High power buffers
- High current laser/LED systems
- Industrial Motor Inverter - Power Tools, Robotics
- Isolated Supplies for controller area network (CAN),
- Power factor correction (PFC) circuits
- High frequency line drivers
- serial peripheral interface (SPI), I2C
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Broadcast equipment
