UCC37323DGNRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | HTSSOP EP |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Packaging | Tape & Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | MOSFET Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4.5A |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 4.5V |
| Power Dissipation-Max | 2.12W |
| Nominal Supply Current | 450μA |
| Power Dissipation | 2.12W |
| Max Supply Current | 450μA |
| Current - Output | 4A |
| Propagation Delay | 35 ns |
| Turn On Delay Time | 35 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Output Polarity | INVERTED |
| Input Characteristics | STANDARD |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 4A |
| High Side Driver | NO |
| Turn Off Time | 0.05 µs |
| Height Seated (Max) | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC37323DGNRG4 Overview
For greater flexibility, the HTSSOP EP package is adopted.A package of Tape & Reel has been used.Mosfet driver is based on 8 terminations.Mosfet driver is mounted using the Surface Mount method.When designing, the device is configured with 8 pins.Mosfet driver is designed specifically to run on 14V volts of power.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.There is a maximum output current of 4.5A that can be achieved.There are various useful electronic components in its subcategory MOSFET Drivers.The board has a total of 8 component pins.The basis of this system consists of 2 outputs.There is a maximum acceptable operating temperature of 70°C.0°C is the minimum operating temperature.To maintain higher stability, the supply current should always be 450μA.The supply voltage of 15V is its maximum value for operation.This device operates at 4.5V as the minimum supply voltage.In this case, the current output is 4A.Its input is characterized by the value STANDARD.
UCC37323DGNRG4 Features
Embedded in the Tape & Reel package
8 pins
UCC37323DGNRG4 Applications
There are a lot of Texas Instruments UCC37323DGNRG4 gate drivers applications.
- A/D drivers
- Isolated Supplies for controller area network (CAN),
- Commercial and agricultural vehicles (CAV)
- Portable computers
- UPS systems
- RGB applications
- serial peripheral interface (SPI), I2C
- Motor Controls
- PCMCIA applications
- DC-DC Converters
