UCC37324DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.14W |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Base Part Number | UCC37324 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4.5A |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 750μA |
| Power Dissipation | 1.14W |
| Output Current | 4A |
| Max Supply Current | 750μA |
| Propagation Delay | 35 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 20ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC37324DG4 Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.There is a package in the form of Tube.Surface Mount is mounted in the way.By using 4.5V~15V supply voltage, it is able to demonstrate its superiority.There is a gate type of N-Channel, P-Channel MOSFET in this design.For this device, the temperature range is -55°C~150°C TJ.Input type of Non-Inverting is used.Its configuration is based on a total of 8 terminations.There are various parts that can be found under its base part number UCC37324.Mosfet driver is mounted using Surface Mount.During design, it is configured with 8 pins.A voltage of 14V is required for its operation.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 4.5A.Several electronic components are included in its subcategory of MOSFET Drivers.On the board, there are 8 component pins.The basis of this model has 2 outputs integrated.The output current of this device can be set to 4A.Considering its maximum power dissipation, 1.14W shows its maximum capacity to transfer and conduct power loss without overheating.For higher stability, the supply current should be kept at 750μA.Due to its power supply of 4.5/15V, it provides an effective solution to power supply problems for a wide range of applications.Mosfet gate drivers receives an input of STANDARD.
UCC37324DG4 Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1.14W
UCC37324DG4 Applications
There are a lot of Texas Instruments UCC37324DG4 gate drivers applications.
- Line drivers
- Isolated Supplies for Motor Control
- Pulse transformer drivers
- Isolated switch mode power supplies (SMPS)
- Motor Control
- UPS systems
- LCD/LCoS/DLP portable and embedded pico projectors
- Topologies
- Solar power supplies
- Power factor correction (PFC) circuits
