UCC37325D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.14W |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Base Part Number | UCC37325 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4.5A |
| Operating Supply Voltage | 12V |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 600μA |
| Power Dissipation | 1.14W |
| Output Current | 4A |
| Max Supply Current | 600μA |
| Propagation Delay | 35 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 35 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Output Polarity | TRUE AND INVERTED |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 20ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC37325D Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.A package of Tube has been used.Surface Mount is mounted in the way.When the supply voltage is set to 4.5V~15V, it can demonstrate its superiority.The gate type on this device is N-Channel, P-Channel MOSFET.There is a temperature range for this device of -55°C~150°C TJ.Mosfet driver accepts input of type Inverting, Non-Inverting.8 terminations constitute its foundation.There are numerous related parts listed under its base part number UCC37325.The device is mounted with Surface Mount.A total of 8 pins are available on the device.The device is specifically designed to operate at 14V volts.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.In the maximum case, the output current can be 4.5A volts.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.There are 8 component pins on the board.For its basis, 2 outputs are integrated.An output current of 4A is supported.The maximum power dissipation of 1.14W shows its maximum capability to transfer and conduct power loss without overheating.The supply current should be kept at 600μA to ensure higher stability.Based on its power supplies of 4.5/15V, it solves the problem of power supply failure for a variety of applications.Setting the operating supply voltage to 12V is recommended.This function has an input of STANDARD.
UCC37325D Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1.14W
UCC37325D Applications
There are a lot of Texas Instruments UCC37325D gate drivers applications.
- Commercial and agricultural vehicles (CAV)
- Welding
- Automotive Applications
- Isolated switch mode power supplies (SMPS)
- High power buffers
- Broadcast equipment
- Portable computers
- Digitally controlled power supplies
- Commercial air-conditioning (CAC)
- High-speed communications
