UCC37325DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.14W |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Base Part Number | UCC37325 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4.5A |
| Operating Supply Voltage | 12V |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 600μA |
| Power Dissipation | 1.14W |
| Output Current | 4A |
| Max Supply Current | 600μA |
| Propagation Delay | 35 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 35 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Output Polarity | TRUE AND INVERTED |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 20ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC37325DR Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.A package of Tape & Reel (TR) has been used.Surface Mount is mounted in the way.By using 4.5V~15V supply voltage, it is able to demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.This device allows temperatures in the range of -55°C~150°C TJ.Inverting, Non-Inverting is used as the input type in this program.The configuration is based on 8 terminations.There are numerous related parts listed under its base part number UCC37325.Mosfet driver is mounted using Surface Mount.In the device, there are 8 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 14V.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.4.5A is the maximum output current.There are various useful electronic components in its subcategory MOSFET Drivers.There are 8 component pins on the board.Mosfet driver is based on a basis of 2 outputs that have been integrated.The output current can be set to 4A.The maximum power dissipation of 1.14W shows its maximum capability to transfer and conduct power loss without overheating.Keeping the supply current at 600μA ensures greater stability.With its 4.5/15V power supply, it provides power for diverse applications.Setting the operating supply voltage to 12V is recommended.Its input is characterized by the value STANDARD.
UCC37325DR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1.14W
UCC37325DR Applications
There are a lot of Texas Instruments UCC37325DR gate drivers applications.
- High frequency line drivers
- General Purpose 3-Phase Inverter
- Line drivers
- Telecom switch mode power supplies
- RGB applications
- LCD/LCoS/DLP portable and embedded pico projectors
- 3-Phase Motor Inverter Driver
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Portable computers
- Active filtering
