UCC3800D
| Parameters | |
|---|---|
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC3800 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.075V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 500μA |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 6.9V~12V |
| Control Features | Frequency Control |
| Topology | Buck, Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 46kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Reference Voltage | 5V |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 25mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 99% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Tolerance | 1.5% |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
UCC3800D Overview
It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. For 1 outputs, the dc motor controller is appropriate. Packaged in solid enclosures, this pmic has a Tube rating. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 6.9V~12V and has a 6.9V~12V supply voltage. Suitable for a 0°C~70°C TA dc switcher. This switching controller can switch at 46kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Frequency Control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. switching converters terminal (s) are designed to be at DUAL. A variety of terminations with 8 of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input is 10V. You can find other relevant dc to dc converter ics by searching "UCC3800". The switching converter has a total of 8 pins. There is a particular type of Switching Regulator or Controllers in switching converter. Test statistics indicate DC regulator outputs 5.075V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. It is set to 100 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. Switching controller operates at 1MHz Hz. The supply voltage must be 10V. There should be 25mA current exceeding 25mA supplied to the controller. Switching voltage regulators' nominal current supply is 500μA.
UCC3800D Features
Transistor Driver Outputs
Switching Frequency: 46kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
UCC3800D Applications
There are a lot of Texas Instruments UCC3800D DC to DC converter applications.
- Communication system
- PSRR circuits
- Die casting equipment
- Large fire protection systems
- Servo drive system
- Printing
- Television equipment
- Electrical power transmission
- Smoke prevention equipment
- Automatic plug-in machines
