UCC3800DG4

8 Terminals 6.9V~12V 8-Pin UCC3800 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 46kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC3800DG4
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 409
Description: 8 Terminals 6.9V~12V 8-Pin UCC3800 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 46kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	72.603129mg
Operating Temperature	0°C~70°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	10V
Frequency	1MHz
Base Part Number	UCC3800
Function	Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	5.075V
Output Type	Transistor Driver
Input Voltage-Nom	10V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Power Dissipation	650mW
Output Current	1A
Voltage - Supply (Vcc/Vdd)	6.9V~12V
Control Features	Frequency Control
Input Voltage (Min)	7.5V
Topology	Buck, Boost, Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	46kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	41ns
Supply Current-Max (Isup)	25mA
Synchronous Rectifier	No
Fall Time (Typ)	44 ns
Switcher Configuration	SINGLE
Max Duty Cycle	100 %
Input Current	500μA
Duty Cycle (Max)	99%
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC3800DG4 Overview

With its 8-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. An enclosure of Tube is used to package the PMIC. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc controls with 6.9V~12V voltage are supplied and operated. Suitable for work in a 0°C~70°C TA dc switcher. This switching controller can switch at 46kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Switching control is made easier with the dcdc regulator's Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. Various 8 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 10V. You can find other relevant dc to dc converter ics by searching "UCC3800". There are 8 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. 7.5V should be the minimum input voltage for the dc dc voltage regulator. According to the test statistics, DC regulator outputs 5.075V voltage. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 100 % to ensure reliability during power-up and power-down. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. A frequency of 1MHz is set for the switching controller. There is a requirement for a 10V supply voltage. In order to ensure proper operation, the controller should not receive more current than 25mA. For operation, the switching converter could be satisfied with 500μA current flow input.