UCC3800PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC3800 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 500μA |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 6.9V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 7.5V |
| Topology | Buck, Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 46kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 25mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 99% |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3800PW Overview
It comes in a 8-TSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. 1 outputs are supported by the dc motor controller. Tube solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) are supported. The supply and operating voltage of the dc control are 6.9V~12V. Worked in a 0°C~70°C TA dc switcher before. With this switching controller, you can switch at 46kHz. The Surface Mount allows it to be used for dc dc regulator in general. Frequency Control is used for efficient switching control in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. Various 8 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 10V. You can find other relevant dc to dc converter ics by searching "UCC3800". Pins number 8 of switching converter in total. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 7.5V. According to the test statistics, DC regulator outputs 1V voltage. The dc dc regulator's usual output current is 1A, which should be noted down when you start a project. voltage regulator dc to dcs with a 100 % duty cycle are designed to be reliable when powered on and powered off. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controller operates at a frequency of 1MHz. Switching controller is necessary to provide a voltage of 10V. The controller should not be supplied with more current than 25mA. This the controllers dc receives a 500μA nominal current supply.
UCC3800PW Features
Transistor Driver Outputs
Switching Frequency: 46kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
UCC3800PW Applications
There are a lot of Texas Instruments UCC3800PW DC to DC converter applications.
- Household control circuits
- Access control systems
- Flaw detection equipment
- USB circuits
- Product testing
- Ball screw pair
- Window air conditioners
- Surface processing equipment
- Nuclear power plants
- Gear/thread machining machines
