UCC3801N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Tolerance | 1.5% |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Supply Voltage | 10V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | UCC3801 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.075V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 500μA |
| Output Configuration | Positive |
| Power Dissipation | 1W |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7.4V~12V |
| Control Features | Frequency Control |
| Topology | Buck, Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 46kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Reference Voltage | 5V |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 25mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 50 % |
| Input Current | 500μA |
| Duty Cycle (Max) | 49% |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3801N Overview
Capsuled in the 8-DIP (0.300, 7.62mm) package, the switching controller can be used for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. Packaged in solid enclosures, this pmic has a Tube rating. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control operates at 7.4V~12V and has a 7.4V~12V supply voltage. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. Switching can be done at 46kHz with this switching controller. dc dc regulator can be generalized using Through Hole. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminal (s) are designed at DUAL . An array of 8 terminations of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 10V. You can find other relevant dc to dc converter ics by searching "UCC3801". Pins number 8 of switching converter in total. In particular, switching converter is a type of Switching Regulator or Controllers. Statistically, the DC regulator outputs 5.075V voltage. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. DC switcher's Through Hole makes it qualified for most application and prototype designs. DC switcher'sThe switching controller works at a frequency of 1MHz. This voltage controller requires a supply voltage of 10V. A controller's current should not exceed 25mA. There is a nominal current supply of 500μA for this the controllers dc. Input of 500μA current flow would satisfy the operation requirements of the switching converter .
UCC3801N Features
Transistor Driver Outputs
Switching Frequency: 46kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC3801N Applications
There are a lot of Texas Instruments UCC3801N DC to DC converter applications.
- ATMs
- Communication system
- Planers
- Shearing machines
- Medical monitoring systems
- Power supplies of electronic gadgets
- USB circuits
- seismic instrument power circuits
- Household control circuits
- Gear/thread machining machines
