banner_page

UCC3801NG4

8 Terminals 7.4V~12V 8-Pin UCC3801 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 46kHz Transistor Driver


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-UCC3801NG4
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 229
  • Description: 8 Terminals 7.4V~12V 8-Pin UCC3801 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 46kHz Transistor Driver (Kg)

Details

Tags

Parameters
Topology Buck, Boost, Flyback, Forward Converter
Control Mode CURRENT-MODE
Frequency - Switching 46kHz
Control Technique PULSE WIDTH MODULATION
Rise Time 41ns
Supply Current-Max (Isup) 25mA
Synchronous Rectifier No
Fall Time (Typ) 44 ns
Switcher Configuration SINGLE
Max Duty Cycle 50 %
Duty Cycle (Max) 49%
Height 5.08mm
Length 9.81mm
Width 6.35mm
Thickness 3.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Weight 523.190449mg
Operating Temperature 0°C~70°C TA
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Switching Regulator or Controllers
Technology BICMOS
Terminal Position DUAL
Supply Voltage 10V
Terminal Pitch 2.54mm
Frequency 1MHz
Base Part Number UCC3801
Function Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs 1
Output Voltage 1V
Output Type Transistor Driver
Input Voltage-Nom 10V
Analog IC - Other Type SWITCHING CONTROLLER
Output Configuration Positive
Output Current 1A
Voltage - Supply (Vcc/Vdd) 7.4V~12V
Control Features Frequency Control

UCC3801NG4 Overview


It comes in a 8-DIP (0.300, 7.62mm) package, so switching controller can be used for most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. It is capable of handling Transistor Driver dc switching's outputs (s). A 7.4V~12V voltage is supplied to the dc control and used for operating it. Worked in a 0°C~70°C TA dc switcher before. It can switch at 46kHz. It is suitable for general dc dc regulator when it is set to Through Hole. For efficient switching control, the dcdc regulator features Frequency Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . Various 8 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis 10V volts. Searching "UCC3801" will return other relevant dc to dc converter ics. There are only 8 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. A 1V voltage of DC regulator was detected in the test statistics. If you start a project, note down the dc dc regulator's usual output current of 1A. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. The Through Hole makes DC switcher suitable for most applications and prototypes. There is 1MHz frequency setting on the switching controller. This voltage controller requires a supply voltage of 10V. 25mA more than 25mA current should be supplied to the controller.

UCC3801NG4 Features


Transistor Driver Outputs
Switching Frequency: 46kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz

UCC3801NG4 Applications


There are a lot of Texas Instruments UCC3801NG4 DC to DC converter applications.

  • Pipe bending machines
  • Low output voltage switching power supply circuits
  • Motor controller circuits
  • Surface processing equipment
  • Thermal power
  • USB circuits
  • Game consoles
  • Constant current circuits
  • Remotely powered electric motors
  • Energy management systems

Write a review

Note: HTML is not translated!
    Bad           Good