UCC3801PWTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC3801 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.4V~12V |
| Control Features | Frequency Control |
| Topology | Buck, Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 46kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 25mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3801PWTR Overview
It comes in the 8-TSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. There is sufficient capacity to generate switching controller for outputs 1. A solid enclosure of Tape & Reel (TR) surrounds pmic. Transistor Driver dc switching's outputs (s) can be handled by it. 7.4V~12V is the operating voltage and supply voltage of the dc control. Worked in a 0°C~70°C TA dc switcher before. In this switching controller, the switch can be set to 46kHz. A generalization of dc dc regulator can be made using Surface Mount. For efficient switching control, the dcdc regulator features Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. 8 terminations with a variety of function. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 10V. UCC3801 can be used to locate other relevant dc to dc converter ics. There are only 8 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. DC regulator outputs 1V voltage according to the test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1A. The duty cycle of the voltage regulator dc to dc can be set to 50 % on power-up or power-down to ensure reliability. The Surface Mount makes DC switcher suitable for most applications and prototypes. Switching controllers operate at 1MHz frequencies. This voltage controller requires a supply voltage of 10V. 25mA more than 25mA current should be supplied to the controller.
UCC3801PWTR Features
Transistor Driver Outputs
Switching Frequency: 46kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC3801PWTR Applications
There are a lot of Texas Instruments UCC3801PWTR DC to DC converter applications.
- Game consoles
- Series voltage regulation circuits
- Surge protection circuits
- seismic instrument power circuits
- Computer monitoring equipment of building
- Direct power supply system
- Shearing machines
- Electrical power transmission
- Handheld GPS
- Printing
