UCC3802DTRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC3802 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Boost, Buck, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 25mA |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 100 % |
| Duty Cycle | 99% |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3802DTRG4 Overview
It is embedded in package 8-SOIC (0.154, 3.90mm Width) .The ac dc converter is available in Tape & Reel (TR) case.In this case, the AC/DC converter is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~85°C TA degrees Celsius.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.In this AC to DC transformer, the switching frequency is Up to 1MHz .Within the range of 8.3V~12V supply voltage (Vcc/Vdd), it can be used.It has a total of 8 terminations.On the ac/dc converter, there are 8 pins.In this ac-dc converter, there are 8 pins.The ac dc converters are suitable to mount by Surface Mount .Based on the UCC3802 family, you can search for similar acdc converters.A total of 1 outputs need to be run.AC to DC converter is included in Switching Regulator or Controllers .Current output is set to 1A .In this AC to DC transformer, the output voltage is 1V .As long as AC to DC converter is operated at frequency 1MHz ,it is capable of attaining high efficiency.It is imperative that this AC to DC converter is set to 10V at all times.
UCC3802DTRG4 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 1A
UCC3802DTRG4 Applications
There are a lot of Texas Instruments UCC3802DTRG4 AC DC Converters applications.
- Auxiliary Power Supply
- Portable audio
- Standby and Auxiliary Power Supplies
- Set-top boxes
- Adapters for Handheld Electronics
- Appliances
- Handheld/Battery-Powered Systems
- ATX/BTX Auxiliary Power
- Wall switches
- Standby power supplies for IR
