UCC3803N

8 Terminals 3.6V~12V 8-Pin UCC3803 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 31kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC3803N
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 600
Description: 8 Terminals 3.6V~12V 8-Pin UCC3803 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 31kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Weight	523.190449mg
Operating Temperature	0°C~70°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Supply Voltage	10V
Terminal Pitch	2.54mm
Frequency	1MHz
Base Part Number	UCC3803
Function	Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	4.06V
Output Type	Transistor Driver
Input Voltage-Nom	10V
Analog IC - Other Type	SWITCHING CONTROLLER
Nominal Supply Current	500μA
Output Configuration	Positive
Power Dissipation	1W
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	3.6V~12V
Control Features	Frequency Control
Topology	Buck, Boost, Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	31kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	41ns
Supply Current-Max (Isup)	25mA
Synchronous Rectifier	No
Fall Time (Typ)	44 ns
Nominal Input Voltage	10V
Switcher Configuration	SINGLE
Max Duty Cycle	100 %
Input Current	500μA
Duty Cycle (Max)	99%
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC3803N Overview

It comes in a 8-DIP (0.300, 7.62mm) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. An enclosure of Tube is used to package the PMIC. It is capable of handling Transistor Driver dc switching's outputs (s). 3.6V~12V is the supply voltage and the operating voltage of the dc control. A 0°C~70°C TA dc switcher is not a problem. There is a switch at 31kHz that can be used with this controller. The Through Hole allows it to be used for dc dc regulator in general. For efficient switching control, the dcdc regulator features Frequency Control. SWITCHING CONTROLLER analog IC connects the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of 8 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 10V is input. In addition to "UCC3803", there are other relevant dc to dc converter ics you can find. There are only 8 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, DC regulator outputs 4.06V volts. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. It is set to 100 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. In most applications and prototype designs, DC switcher is qualified as a Through Hole. Switching controller operates at a frequency of 1MHz. Input voltage can be set to 10V for nominal working status. The supply voltage must be 10V. You should not supply more current than 25mA to the controller. nominal current supply for this the controllers dc is 500μA. Input of 500μA current flow would satisfy the operation requirements of the switching converter .