UCC3803NG4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| JESD-609 Code | e4 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 4V |
| Input Voltage-Nom | 10V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Current - Output | 1A |
| Frequency (Max) | 1MHz |
| Voltage - Output | 1V |
| Input Voltage (Min) | 4V |
| Topology | Flyback, Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 100 % |
| Height | 4.57mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC3803NG4 Overview
Capsuled in the PDIP package, the switching controller can be used for a wide range of applications. For outputs of 1, this dc motor controller is suitable. With this switching controller, you can switch at 1MHz. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Different dc switching's functions can be applied to 8 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 10V volts. There are 8 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 4V. According to the test statistics, DC regulator outputs 4V voltage. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. Because of DC switcher's Through Hole, it is suitable for most prototype designs and applications. There is 1MHz frequency setting on the switching controller. Keep dc regulator at a temperature of 0°C or above. DC regulator should run at a temperature of 70°C more than 70°C degrees Celsius. 1 functions are available in total for the switch converters. There is a design for voltage regulators switching with 8 pins. There is a maximum frequency of 1MHz that the controller can switch at. Ideally, it is suited for switching controllers with a 1A input. It outputs a value of 1V in normaloperating procedures. The supply voltage should be 10V. It is important that the controller is supplied with 30mA more than 30mA volts of current. Voltage is rated 12V for maximum supply.
UCC3803NG4 Features
Switching Frequency: 1MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
UCC3803NG4 Applications
There are a lot of Texas Instruments UCC3803NG4 DC to DC converter applications.
- Mobile phones
- Various CNC machine tools
- Electrical power transmission
- Digital precision reference circuits
- Driver circuits
- Electrical distribution systems
- Computer application technology
- Household control circuits
- Network technology
- Overvoltage protection circuits in TV sets
