UCC3804N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Tolerance | 1.5% |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 1W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | UCC3804 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5.075V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 500μA |
| Power Dissipation | 1W |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Boost, Buck, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Reference Voltage | 5V |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 25mA |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Voltage - Start Up | 12.5V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3804N Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm) .There is a AC/DC power converter of Tube available.There is a AC/DC converter mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~85°C TA in order to ensure its performance.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.At this point, the switching frequency reaches Up to 1MHz .A range of 8.3V~12V supply voltages (Vcc/Vdd) can be used.As a result, it has had 8 terminations.The ac/dc converter has a total of 8 pins.The pins of the ac-dc converter total to 8 .The ac dc converters is suitable for mounting by Through Hole .Similar acdc converters can be found using the UCC3804 family.AC to DC converter is necessary to run 1 outputs.The ac to dc conversions are included in Switching Regulator or Controllers .AC to DC converter is set to 1A for the output current.There is 5.075V output voltage from this AC/DC converter.High efficiency can be achieved when AC to DC converters frequency is set to 1MHz .In the following link, you will find the REACH SVHC standard: No SVHC .In all situations, this AC to DC converter should be set to 10V .
UCC3804N Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 1A
UCC3804N Applications
There are a lot of Texas Instruments UCC3804N AC DC Converters applications.
- Battery Chargers
- Cleaners
- Adapter/Charger for Cordless Phones
- Air conditioners
- Remotely-controlled appliances
- Power adapters for network devices
- Open Frame Switching Power Supply
- Adapter for ADSL
- Portable audio
- Shaver Charger
