UCC3805DG4

8 Terminals 3.6V~12V 8-Pin UCC3805 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 31kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC3805DG4
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 128
Description: 8 Terminals 3.6V~12V 8-Pin UCC3805 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 31kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	72.603129mg
Operating Temperature	0°C~70°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Termination	SMD/SMT
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Max Power Dissipation	650mW
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	10V
Frequency	1MHz
Base Part Number	UCC3805
Function	Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	5V
Output Type	Transistor Driver
Max Output Current	500μA
Input Voltage-Nom	10V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Power Dissipation	650mW
Output Current	1A
Voltage - Supply (Vcc/Vdd)	3.6V~12V
Control Features	Frequency Control
Input Voltage (Min)	4V
Topology	Buck, Boost, Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	31kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	41ns
Supply Current-Max (Isup)	25mA
Synchronous Rectifier	No
Fall Time (Typ)	44 ns
Switcher Configuration	SINGLE
Max Duty Cycle	50 %
Input Current	500μA
Duty Cycle (Max)	49%
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC3805DG4 Overview

In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. It is sufficient to generate 1 outputs with this dc motor controller. PMIC packaging is solid with a Tube enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sVoltages 3.6V~12V are the dc control's supply voltage and operating voltage, respectively. Worked in a 0°C~70°C TA dc switcher before. This switching controller can switch at 31kHz. dc dc regulators can be carried out with Surface Mount. To provide efficient switching control, Frequency Control is included in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. switching converters terminal (s) are designed to be at DUAL. An array of 8 terminations of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. 10V nominal DC switcher's voltage input. Other relevant dc to dc converter ics can be found by searching "UCC3805". There are only 8 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended to use 4V as the minimum input voltage of dc dc voltage regulator. According to the test statistics, DC regulator outputs 5V voltage. You should note that the dc dc regulator's usual output current is 1A. It is set to 50 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controller operates at a frequency of 1MHz. This voltage controller requires a supply voltage of 10V. The dc switcher will not provide an output current greater than 500μA. 25mA more than 25mA current should be supplied to the controller. 500μA current flow input could be used to operate the switching converter .