UCC3806DWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | UCC3806 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 11.9V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~14.5V |
| Control Features | Current Limit, Enable, Frequency Control |
| Topology | Buck, Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 47kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 35ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 35 ns |
| Nominal Input Voltage | 14.5V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 50 % |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3806DWG4 Overview
It comes in a 16-SOIC (0.295, 7.50mm Width) package, so switching controller can be used for most applications. For 2 outputs, the dc motor controller is appropriate. An enclosure of Tube is used to package the PMIC. There are Transistor Driver dc switching's output (s) that it can handle. This dc control has a supply voltage and operating voltage of 8V~14.5V. Suitable for working in an dc switcher that has a 0°C~70°C TA. With this switching controller, you can switch at 47kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. 16 terminations with various dc switching's functions. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. Search for "UCC3806" to find other relevant dc to dc converter ics. Total pins of switching converter are 16. There is a particular type of Switching Regulator or Controllers in switching converter. A 11.9V voltage of DC regulator was detected in the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controller operates at 1MHz Hz. For nominal working status, the input voltage can be set as 14.5V.
UCC3806DWG4 Features
Transistor Driver Outputs
Switching Frequency: 47kHz
Current Limit, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC3806DWG4 Applications
There are a lot of Texas Instruments UCC3806DWG4 DC to DC converter applications.
- Serial communication converter
- Overvoltage protection circuits in TV sets
- Communication system
- Automatic plug-in machines
- Telecommunications equipment
- Linear guide
- Servo drive system
- Surface processing equipment
- Gear/thread machining machines
- Arc suppression circuits
