UCC3806NG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Frequency | 1MHz |
| Base Part Number | UCC3806 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 11.9V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~14.5V |
| Control Features | Current Limit, Enable, Frequency Control |
| Topology | Buck, Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 47kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 35ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 35 ns |
| Nominal Input Voltage | 14.5V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 50 % |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3806NG4 Overview
This switching controller fits most application requirements since it is packaged in a 16-DIP (0.300, 7.62mm) package. dc motor controller is suitable for 2 output generation. Tube solid enclosure protects the pmic. The program can handle Transistor Driver dc switching's outputs (s). 8V~14.5V is the operating voltage and supply voltage of the dc control. Work well in dc switchers with a 0°C~70°C TA. The switching controller can be switched at 47kHz. The Through Hole makes it ideal for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Frequency Control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminal (s) are designed at DUAL . A variety of 16 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. A search for "UCC3806" will reveal other relevant dc to dc converter ics. 16 pins are present on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. Based on the test statistics, DC regulator outputs voltage 11.9V. In most cases, the output current of the dc dc regulator will be 100mA, so note that when you start the project. The maximum duty cycle of this voltage regulator dc to dc is set to 50 % to ensure reliability during power-up and power-down. This Through Hole makes DC switcher suitable for most prototypes and applications. Switching controller operates at 1MHz Hz. It is possible to set the input voltage to 14.5V for nominal working status.
UCC3806NG4 Features
Transistor Driver Outputs
Switching Frequency: 47kHz
Current Limit, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC3806NG4 Applications
There are a lot of Texas Instruments UCC3806NG4 DC to DC converter applications.
- Overvoltage protection circuits in TV sets
- Electric heating, lighting
- Photovoltaic power
- Textile machinery
- Elevator lighting
- Experimental setup
- Digital display device
- Special machining machine tools
- Various CNC machine tools
- Sink circuits
