UCC3806PW
| Parameters | |
|---|---|
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | UCC3806 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 11.9V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~14.5V |
| Control Features | Current Limit, Enable, Frequency Control |
| Topology | Buck, Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 47kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 35ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 35 ns |
| Nominal Input Voltage | 14.5V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 50 % |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 5mm |
UCC3806PW Overview
It comes in a 16-TSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. It is sufficient to generate 2 outputs with this dc motor controller. An enclosure of Tube is used to package the PMIC. There are Transistor Driver dc switching's output (s) that it can handle. DC control operates at 8V~14.5V volts and has 8V~14.5V supply voltage. Worked in a 0°C~70°C TA dc switcher before. With this switching controller, you can switch at 47kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . An array of 16 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. Other relevant dc to dc converter ics will be returned if you search "UCC3806". There are 16 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 11.9V. normally, the dc dc regulator's output current is 100mA, which you should keep in mind when starting a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sSwitching controller operates at 1MHz Hz. It is possible to set the input voltage to 14.5V for nominal working status.
UCC3806PW Features
Transistor Driver Outputs
Switching Frequency: 47kHz
Current Limit, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC3806PW Applications
There are a lot of Texas Instruments UCC3806PW DC to DC converter applications.
- Printing equipment
- Motor controller circuits
- Digital precision reference circuits
- Electrical distribution systems
- Correction machines
- Special machining machine tools
- Milling machines
- Precision electronic equipment
- Arc suppression circuits
- Flaw detection equipment
