UCC3807DTR-1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | UCC3807 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 400mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 6.9V~13.5V |
| Input Voltage (Min) | 7.5V |
| Topology | Buck, Boost, Flyback, Forward Converter, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 202kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 78 % |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC3807DTR-1 Overview
It comes in the 8-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. For outputs of 1, this dc motor controller is suitable. The pmic is packaged in Tape & Reel (TR) solid enclosure. Transistor Driver dc switching's outputs (s) are supported. dc controls with 6.9V~13.5V voltage are supplied and operated. Suitable for a 0°C~70°C TA dc switcher. The switching controller is capable of switching at the 202kHz position. It is suitable for general dc dc regulator when it is set to Surface Mount. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. DUAL are the position of the terminal of the switching converters. 8 terminations with various dc switching's functions. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input of 10V. You can find other relevant dc to dc converter ics by searching "UCC3807". There are 8 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 7.5V. DC regulator outputs 400mV voltage based on test statistics. It's important to remember that the dc dc regulator's normaloutput current is 100mA, so you should note it down when starting a new project. voltage regulator dc to dcs with a 78 % duty cycle are designed to be reliable when powered on and powered off. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controller operates at 1MHz Hz.
UCC3807DTR-1 Features
Transistor Driver Outputs
Switching Frequency: 202kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 78 %
Frequency: 1MHz
UCC3807DTR-1 Applications
There are a lot of Texas Instruments UCC3807DTR-1 DC to DC converter applications.
- Product testing
- Surge protection circuits
- Refrigerators of central air conditioners
- Computer monitoring equipment of building
- Scientific testing
- Shearing machines
- Serial communication converter
- Wind power
- Printing
- Direct power supply system
