UCC3807DTR-3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC3807 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 400mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 4.1V~13.5V |
| Input Voltage (Min) | 4.3V |
| Topology | Buck, Boost, Flyback, Forward Converter, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 202kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | BUCK-BOOST |
| Max Duty Cycle | 78 % |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3807DTR-3 Overview
It comes in the 8-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. 1 outputs are supported by the dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. A 4.1V~13.5V voltage is supplied to the dc control and used for operating it. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. There is a switch at 202kHz that can be used with this controller. The Surface Mount allows it to be used for dc dc regulator in general. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. The switching converters's terminals (s) are designed at DUAL. A variety of terminations with 8 of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 10V. UCC3807 can be used to locate other relevant dc to dc converter ics. There are 8 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. The minimum input voltage of the dc dc voltage regulator should be 4.3V. Based on the test statistics, DC regulator outputs voltage 400mV. In most cases, the dc dc regulator's output current is 100mA. This information should be noted when you begin working with the component. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 78 %. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. The switching controller works at a frequency of 1MHz. Switching controller is necessary to supply a voltage of 10V.
UCC3807DTR-3 Features
Transistor Driver Outputs
Switching Frequency: 202kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 78 %
Frequency: 1MHz
UCC3807DTR-3 Applications
There are a lot of Texas Instruments UCC3807DTR-3 DC to DC converter applications.
- Household control circuits
- Product burn-in
- Medical equipment
- Flexible manufacturing cells
- Servo drive system
- Bending machines
- Mobile phones
- Surge protection circuits
- Product testing
- Grinders
