UCC3807N-1
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| JESD-30 Code | R-PDIP-T8 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 6.9V~13.5V |
| Input Voltage (Min) | 7.5V |
| Topology | Buck, Boost, Flyback, Forward Converter, SEPIC |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | 202kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 78% |
| Height Seated (Max) | 5.33mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
UCC3807N-1 Overview
With a 8-DIP (0.300, 7.62mm) package, the switching controller is suitable for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. An enclosure of Tube is used to package the PMIC. The program can handle Transistor Driver dc switching's outputs (s). A 6.9V~13.5V voltage is supplied to the dc control and used for operating it. Suitable for a 0°C~70°C TA dc switcher. With this switching controller, you can switch at 202kHz. A generalization of dc dc regulator can be made using Through Hole. The switch converters are connected to a SWITCHING CONTROLLER analog IC. A switching converters's terminal (s) sits at the DUAL position. Various 8 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 10V. 7.5V should be the minimum input voltage for the dc dc voltage regulator. The output of this function is the greatest value of 1A.
UCC3807N-1 Features
Transistor Driver Outputs
Switching Frequency: 202kHz
PULSE WIDTH MODULATION
UCC3807N-1 Applications
There are a lot of Rochester Electronics, LLC UCC3807N-1 DC to DC converter applications.
- Injection molding machinery
- Sensitive electronic devices
- Product burn-in
- Combined machine tools
- CMM
- Nuclear power plants
- Serial communication converter
- Communication system
- Smoke exhaust equipment
- Digital display device
