UCC3807N-1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | UCC3807 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 400mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 6.9V~13.5V |
| Quiescent Current | 1.3mA |
| Input Voltage (Min) | 7.5V |
| Topology | Buck, Boost, Flyback, Forward Converter, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 202kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 81 % |
| Duty Cycle (Max) | 78% |
| Height Seated (Max) | 5.33mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC3807N-1 Overview
In the 8-DIP (0.300, 7.62mm) package, the switching controller meets most application requirements. This dc motor controller can be used to generate outputs with 1 numbers. PMIC is packaged in a solid enclosure of Tube. The system can process Transistor Driver dc switching's outputs (s). DC control operates at 6.9V~13.5V volts and has 6.9V~13.5V supply voltage. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. There is a switch at 202kHz that can be used with this controller. As it has a Through Hole value, it can be used for general dc dc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of dc switching's functions can be performed on 8 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. 10V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "UCC3807". 8 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 7.5V. The test statistics indicate that DC regulator outputs a voltage of 400mV. You should note that the dc dc regulator's usual output current is 100mA. It is set to 81 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. In most applications and prototypes, DC switcher's Through Hole makes it suitable. A frequency of 1MHz is used by the switching controller. As long as the dc switching is in a dormant state, it utilizes 1.3mA.
UCC3807N-1 Features
Transistor Driver Outputs
Switching Frequency: 202kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 81 %
Frequency: 1MHz
UCC3807N-1 Applications
There are a lot of Texas Instruments UCC3807N-1 DC to DC converter applications.
- Digital display device
- Shearing machines
- Access control systems
- Medical equipment
- Domestic water pumps
- Serial communication converter
- Alternators
- Scientific research
- Boring machines
- PSRR circuits
