UCC3807N-2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | UCC3807 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 400mV |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~13.5V |
| Quiescent Current | 1.3mA |
| Input Voltage (Min) | 9V |
| Topology | Boost, Buck, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | BUCK-BOOST |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 81 % |
| Duty Cycle | 78% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.5V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3807N-2 Overview
In the package 8-DIP (0.300, 7.62mm) , the ac to dc converter is embedded.The AC/DC power converter Tube is available for this product.Through Hole mounts this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of -55°C~150°C TJ degrees Celsius.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.This AC/DC converter is designed for use within the range of 8.3V~13.5V supply voltage (Vcc/Vdd).In total, there are 8 terminations.On this ac/dc converter, there are 8 pins.The pins of the ac-dc converter count up to 8 .The ac dc converters are suitable for mounting by Through Hole .The UCC3807 family allows you to search for similar acdc converters.In this AC to DC transformer, there are 1 outputs to run.The following ac to dc conversions are contained in Switching Regulator or Controllers .AC to DC converter is set to 100mA for the output current.There is 400mV voltage output from it.This power AC DC is capable of reaching high efficiency when operating at a frequency of 1MHz .This AC to DC converter should always be set to 10V .AC to DC converter consumes quiescent current at 1.3mA .
UCC3807N-2 Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
Output Current at 100mA
UCC3807N-2 Applications
There are a lot of Texas Instruments UCC3807N-2 AC DC Converters applications.
- Smartphones
- AC-DC Output Power Conversion Applications
- Handheld/Battery-Powered Systems
- Standby power supplies for IR
- Automotive Clusters
- Power tools
- Battery chargers for smart phones
- Standby power
- Shaver Charger
- Linear Adapter Replacements
