UCC38084PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC38084 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 4.1V~15V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Frequency Control |
| Input Voltage (Min) | 4.3V |
| Topology | Buck, Boost, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC38084PW Overview
The switching controller fits in the 8-TSSOP (0.173, 4.40mm Width) package and is ideal for most applications. For outputs of 2, this dc motor controller is suitable. The pmic is packaged in Tube solid enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. A 4.1V~15V voltage is supplied to the dc control and used for operating it. Qualified to work in a 0°C~70°C TA dc switcher. There is a switch at 200kHz that can be used with this controller. dc dc regulator can be generalized using Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Frequency Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Different dc switching's functions can be applied to 8 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 10V. Other relevant dc to dc converter ics can be found by searching "UCC38084". The switching converter has a total of 8 pins. Switching converter is a type of Switching Regulator or Controllers in particular. Input voltage of dc dc voltage regulator should be 4.3V. Statistically, DC regulator outputs 500mV volts. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 50 %. 1MHz is the frequency of the switching controller. In a dormant state, the dc switching uses 1.5mA.
UCC38084PW Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC38084PW Applications
There are a lot of Texas Instruments UCC38084PW DC to DC converter applications.
- Combined machine tools
- Automatic plug-in machines
- Lathes
- Pipe bending machines
- Thermal power
- Serial communication converter
- Printing equipment
- Arc suppression circuits
- Household control circuits
- Computer rooms
