UCC38086DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | UCC38086 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 4.1V~15V |
| Control Features | Current Limit, Frequency Control |
| Input Voltage (Min) | 4.3V |
| Topology | Buck, Boost, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC38086DR Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. 2 outputs can be generated with the dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc control's supply and operating voltages are 4.1V~15V. Qualified to work in an dc switcher with 0°C~70°C TA. With this switching controller, you can switch at 200kHz. dc dc regulator can be generalized using Surface Mount. Featured in the dcdc regulator is Current Limit, Frequency Control which allows efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. DUAL are the position of the terminal of the switching converters. An array of 8 terminations of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 10V nominal DC switcher's voltage input. Other relevant dc to dc converter ics will be returned if you search "UCC38086". There are 8 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. It is recommended to use 4.3V as the minimum input voltage of dc dc voltage regulator. A 500mV voltage of DC regulator was detected in the test statistics. In most cases, the output current of the dc dc regulator will be 1A, so note that when you start the project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. Switching controllers work at 1MHz Hz.
UCC38086DR Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC38086DR Applications
There are a lot of Texas Instruments UCC38086DR DC to DC converter applications.
- Analog precision reference circuits
- Electrical distribution systems
- Magnetohydrodynamic power
- Lathes
- seismic instrument power circuits
- Domestic water pumps
- Gear/thread machining machines
- Elevator lighting
- Motor controller circuits
- Nuclear power plants
