UCC3808AD-1G4
| Parameters | |
|---|---|
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 650mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC3808 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Max Output Current | 500mA |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Power Dissipation | 650mW |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~15V |
| Control Features | Frequency Control |
| Topology | Boost, Buck, Half-Bridge, Push-Pull |
| Min Input Voltage | 300mV |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
UCC3808AD-1G4 Overview
It is embedded in package 8-SOIC (0.154, 3.90mm Width) .The AC/DC power converter type is Tube .In this case, the AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -55°C~150°C TJ in order to ensure its performance.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .Vcc/Vdd can be used within the range of 8.3V~15V supply voltage.There are a total of 8 terminations.Approximately 8 pins are present on the ac/dc converter.There are 8 pins on the ac-dc converter.The ac dc converters are suitable for mounting by Surface Mount .It is possible to search for similar acdc converters by using the UCC3808 family.A total of 2 outputs are to be processed.There are a ac to dc conversions included in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 100mA .This AC/DC converter produces a voltage of 5V as its output.A high efficiency is achieved when operating at a frequency of 1MHz .It is possible to read the REACH SVHC standard at: No SVHC .Input voltage for the AC to DC converter is available under 15V .The AC to DC inverter can be used with an input voltage of less than 300mV V.It is important to keep this AC to DC converter set to 10V .
UCC3808AD-1G4 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 100mA
UCC3808AD-1G4 Applications
There are a lot of Texas Instruments UCC3808AD-1G4 AC DC Converters applications.
- Auxiliary Power Supply
- Battery chargers for media tablets
- AC?DC USB chargers for Cell Phones
- PDAs
- SMPS house keeping power supplies
- Rice Cooker
- Standby Power for General Off-Line Applications
- White goods
- Low-Voltage I/O System Power
- Battery chargers for smart phones
