UCC3808ADTR-1G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC3808 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~15V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Boost, Buck, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 13V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3808ADTR-1G4 Overview
There is a ac to dc converter embedded in package 8-SOIC (0.154, 3.90mm Width) .There is a AC/DC power converter of Tape & Reel (TR) available.The AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -55°C~150°C TJ °C in order to achieve its full performance.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.The AC/DC converter is capable of being used when the supply voltage is 8.3V~15V (Vcc/Vdd).In total, there are 8 terminations.The ac/dc converter has 8 pins.A total of 8 pins are present on the ac-dc converter.It is suitable for mounting by Surface Mount .The UCC3808 family can be used to search for similar acdc converters.The number of outputs to run is 2 .The following ac to dc conversions are contained in Switching Regulator or Controllers .Current output is set to 100mA .It produces a voltage of 500mV .High efficiency can be achieved when AC to DC converters frequency is set to 1MHz .Using a unique technique, it is possible to ensure an input voltage with a maximum value of 13V .Keep in mind that this AC to DC converter should always be set to 10V .
UCC3808ADTR-1G4 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 100mA
UCC3808ADTR-1G4 Applications
There are a lot of Texas Instruments UCC3808ADTR-1G4 AC DC Converters applications.
- Standby Power Supply
- Power adapters for network devices
- Power adapters for monitors
- LED Driver
- Adaptors for Portable Media Player
- Universal Off-Line Power Supplies
- Wireless System
- Networking
- Standby Power for General Off-Line Applications
- WiFi Wireless
