UCC3808ADTR-2G4
| Parameters | |
|---|---|
| Synchronous Rectifier | No |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Output Phases | 1 |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC3808 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 4.1V~15V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 4.3V |
| Topology | Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 194kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
UCC3808ADTR-2G4 Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. For 2 outputs, the dc motor controller is appropriate. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sA 4.1V~15V voltage is supplied to the dc control and used for operating it. Qualified to work in a 0°C~70°C TA dc switcher. Using this switching controller, it is possible to switch at 194kHz. The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 8. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 10V. You can find other relevant dc to dc converter ics by searching "UCC3808". Pins number 8 of switching converter in total. The type is a particular Switching Regulator or Controllers of switching converter. dc dc voltage regulators should have a minimum input voltage of 4.3V. DC regulator outputs 500mV voltage based on test statistics. The dc dc regulator's usual output current is 100mA, which should be noted down when you start a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. Switching controllers work at 1MHz Hz. A supply voltage of 10V is required.
UCC3808ADTR-2G4 Features
Transistor Driver Outputs
Switching Frequency: 194kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC3808ADTR-2G4 Applications
There are a lot of Texas Instruments UCC3808ADTR-2G4 DC to DC converter applications.
- Printing equipment
- Electrical distribution systems
- Boring machines
- Fire elevators
- Sensitive electronic devices
- Cutting machine tools
- Lathes
- Computer monitoring equipment of building
- Combined machine tools
- Elevator lighting
