UCC3808APW-2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC3808 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 4.1V~15V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 4.3V |
| Topology | Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 194kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3808APW-2 Overview
With its 8-TSSOP (0.173, 4.40mm Width) package, the switching controller fits the needs of most applications. This dc motor controller can be used to generate outputs with 2 numbers. Tube solid enclosure protects the pmic. The program can handle Transistor Driver dc switching's outputs (s). 4.1V~15V is the operating voltage and supply voltage of the dc control. Worked in an dc switcher with a 0°C~70°C TA rating. Using this switching controller, it is possible to switch at 194kHz. The Surface Mount allows it to be used for dc dc regulator in general. To provide efficient switching control, Frequency Control is included in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. A variety of dc switching's functions can be performed on 8 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis 10V volts. Search for "UCC3808" to find other relevant dc to dc converter ics. 8 pins are present on switching converter. Switching converter is a special type of Switching Regulator or Controllers. It is recommended to use 4.3V as the minimum input voltage of dc dc voltage regulator. DC regulator outputs 500mV voltage according to the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. It is set to 50 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. DC switcher's Surface Mount qualifies it for most applications and prototypes. Switching controllers operate at 1MHz frequencies. The supply voltage must be 10V.
UCC3808APW-2 Features
Transistor Driver Outputs
Switching Frequency: 194kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC3808APW-2 Applications
There are a lot of Texas Instruments UCC3808APW-2 DC to DC converter applications.
- Radio equipment
- Alternators
- Fire elevators
- Automatic testing equipment
- Household control circuits
- Electrical distribution systems
- Post equipment
- ATMs
- CMM
- Hydro power
