UCC3808APWTR-2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC3808 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 4.1V~15V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 4.3V |
| Topology | Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 194kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3808APWTR-2 Overview
With a 8-TSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. It is sufficient to generate 2 outputs with this dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). Voltages 4.1V~15V are the dc control's supply voltage and operating voltage, respectively. Suitable for working in an dc switcher that has a 0°C~70°C TA. The switching controller is capable of switching at the 194kHz position. dc dc regulators can be carried out with Surface Mount. Frequency Control is used for efficient switching control in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. A variety of dc switching's functions can be performed on 8 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 10V. You can find other relevant dc to dc converter ics by searching "UCC3808". There are a total of 8 pins on switching converter. The minimum input voltage of the dc dc voltage regulator should be 4.3V. DC regulator outputs 500mV voltage according to the test statistics. normally, the dc dc regulator's output current is 100mA, which you should keep in mind when starting a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 50 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. The switching controller works at a frequency of 1MHz.
UCC3808APWTR-2 Features
Transistor Driver Outputs
Switching Frequency: 194kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC3808APWTR-2 Applications
There are a lot of Texas Instruments UCC3808APWTR-2 DC to DC converter applications.
- Various precision measuring detectors
- Hydraulic presses
- Energy management systems
- Smart grid
- Grinders
- Correction machines
- Various precision measuring instruments
- Refrigerators of central air conditioners
- Cutting machine tools
- Electrical power transmission
