UCC3808APWTR-2G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC3808 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 4.1V~15V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 4.3V |
| Topology | Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 194kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3808APWTR-2G4 Overview
With a 8-TSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. This dc motor controller can be used to generate outputs with 2 numbers. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. With this function, you can deal with Transistor Driver dc switching's outputs (s). 4.1V~15V is the operating voltage and supply voltage of the dc control. Qualified to work in a 0°C~70°C TA dc switcher. This switching controller can switch at 194kHz. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . An array of 8 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. 10V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "UCC3808". There are 8 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. This dc dc voltage regulator should be powered by a voltage of 4.3V. Statistically, DC regulator outputs 500mV volts. If you start a project, note down the dc dc regulator's usual output current of 100mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controllers operate at 1MHz frequencies. This voltage controller requires a supply voltage of 10V.
UCC3808APWTR-2G4 Features
Transistor Driver Outputs
Switching Frequency: 194kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC3808APWTR-2G4 Applications
There are a lot of Texas Instruments UCC3808APWTR-2G4 DC to DC converter applications.
- Industrial controllers
- Power supplies of electronic gadgets
- Communication system
- Smoke exhaust equipment
- Product testing
- Sink circuits
- Printing
- Imported equipment
- Drilling machines
- Die casting equipment
