UCC3808DTR-2G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC3808 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 4.1V~15V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 4.3V |
| Topology | Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 194kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Output Phases | 1 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3808DTR-2G4 Overview
It comes in the 8-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. dc motor controller is suitable for 2 output generation. Tape & Reel (TR) solid enclosure protects the pmic. The system can process Transistor Driver dc switching's outputs (s). dc controls with 4.1V~15V voltage are supplied and operated. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. There is a switch at 194kHz that can be used with this controller. As it has a Surface Mount value, it can be used for general dc dc regulator. Frequency Control is used for efficient switching control in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. 8 terminations with various dc switching's functions. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. A DC switcher's nominal voltage of 10V is input. A search for "UCC3808" will reveal other relevant dc to dc converter ics. The switching converter has a total of 8 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 4.3V as the minimum input voltage of dc dc voltage regulator. Statistically, the DC regulator outputs 500mV voltage. It's important to remember that the dc dc regulator's normaloutput current is 500mA, so you should note it down when starting a new project. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Surface Mount qualifies it for most applications and prototypes. A frequency of 1MHz is used by the switching controller. Voltage 10V is required for supply.
UCC3808DTR-2G4 Features
Transistor Driver Outputs
Switching Frequency: 194kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC3808DTR-2G4 Applications
There are a lot of Texas Instruments UCC3808DTR-2G4 DC to DC converter applications.
- Hydro power
- Overvoltage protection circuits in TV sets
- Product testing
- PSRR circuits
- Thermal power
- Wide-range voltage regulation circuits
- Driver circuits
- Milling machines
- Direct power supply system
- Analog precision reference circuits
