UCC3808N-2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC3808 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 4.1V~15V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 4.3V |
| Topology | Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 194kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Output Phases | 1 |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3808N-2 Overview
It comes in the 8-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. There is sufficient capacity to generate switching controller for outputs 2. A solid enclosure of Tube surrounds pmic. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4.1V~15V voltage are supplied and operated. Qualified to work in a 0°C~70°C TA dc switcher. In this switching controller, the switch can be set to 194kHz. The Through Hole value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Frequency Control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminal (s) are designed at DUAL . A variety of 8 terminations are available in dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 10V is input. Other relevant dc to dc converter ics will be returned if you search "UCC3808". There are 8 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. Input voltage of dc dc voltage regulator must be 4.3V. DC regulator outputs 500mV voltage based on test statistics. The dc dc regulator's usual output current is 500mA, which should be noted down when you start a project. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. DC switcher's Through Hole qualifies it for most applications and prototypes. Switching controllers work at 1MHz Hz. There must be a voltage supply of 10V volts.
UCC3808N-2 Features
Transistor Driver Outputs
Switching Frequency: 194kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC3808N-2 Applications
There are a lot of Texas Instruments UCC3808N-2 DC to DC converter applications.
- PSRR circuits
- Constant current circuits
- Handheld GPS
- Imported equipment
- Large fire protection systems
- Electric heating, lighting
- Television equipment
- Various precision measuring detectors
- Analog precision reference circuits
- Printing
