UCC3809PTR-2G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 25.996513mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC3809 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 80mA |
| Voltage - Supply (Vcc/Vdd) | 8V~19V |
| Control Features | Frequency Control, Soft Start |
| Topology | Boost, Buck, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 25mA |
| Switcher Configuration | BUCK-BOOST |
| Internal Switch(s) | No |
| Max Duty Cycle | 70 % |
| Duty Cycle | 70% |
| Output Isolation | Isolated |
| Voltage - Start Up | 15V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3809PTR-2G4 Overview
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) is the package in which the ac to dc converter is embedded.In Tape & Reel (TR) case, the ac dc converter is available.The AC/DC converter is mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of -55°C~150°C TJ °C so that it can deliver its performance.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.Supply voltage (Vcc/Vdd) does not need to exceed 8V~19V .As a result, it has a total of 8 terminations.On this ac/dc converter, there are 8 pins.There are 8 pins on the ac-dc converter.It is suitable for mounting by Surface Mount .The UCC3809 family can be used to search for similar acdc converters.A total of 1 outputs need to be run.The ac to dc conversions are contained in Switching Regulator or Controllers .Currently, the output current is set to 80mA .The output voltage of the AC/DC converter is 800mV .AC to DC converter reaches high efficiency when operated at a frequency of 1MHz .Ensure that this AC to DC converter is always set to 12V .
UCC3809PTR-2G4 Features
Packaged with 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
With 8 pins
Output Current at 80mA
UCC3809PTR-2G4 Applications
There are a lot of Texas Instruments UCC3809PTR-2G4 AC DC Converters applications.
- Standby Power Supplies
- Low-Voltage I/O System Power
- Standby Power for General Off-Line Applications
- Battery chargers for cordless
- LED Driver
- Set-top boxes
- Standby power supplies for TV
- Utility meters
- Air conditioners
- Lighting controls
