UCC3810DWTRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Base Part Number | UCC3810 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 1.2V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~11V |
| Control Features | Frequency Control, Sync |
| Input Voltage (Min) | 9.5V |
| Topology | Boost, Buck, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 11V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Fall Time (Typ) | 30 ns |
| Switcher Configuration | PUSH-PULL |
| Internal Switch(s) | No |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Output Isolation | Isolated |
| Voltage - Start Up | 11.3V |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3810DWTRG4 Overview
A ac to dc converter of the package 16-SOIC (0.295, 7.50mm Width) contains the ac to dc converter.It is available in Tape & Reel (TR) AC/DC power converter.There is a mounting point for this AC/DC converter in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~85°C TA °C.Analog ICs of type DUAL SWITCHING CONTROLLER are used in this AC DC converter.Supply voltage (Vcc/Vdd) does not need to exceed 8.3V~11V .As a result, it has had 16 terminations.In this ac/dc converter, there are 16 pins.The pins of the ac-dc converter total to 16 .The ac dc converters are suitable to mount by Surface Mount .It is possible to search for similar acdc converters by using the UCC3810 family.There are 2 outputs to be run.The ac to dc conversions can be found in Switching Regulator or Controllers .200mA is set as the output current.As a result, its output voltage is 1.2V .When operating at a frequency of 1MHz , AC to DC converter is capable of reaching high efficiency.The input voltage with the maximal value of 11V can be ensured on the basis of unique technique.
UCC3810DWTRG4 Features
Packaged with 16-SOIC (0.295, 7.50mm Width)
With 16 pins
Output Current at 200mA
UCC3810DWTRG4 Applications
There are a lot of Texas Instruments UCC3810DWTRG4 AC DC Converters applications.
- ATX/BTX Auxiliary Power
- 3.3V power supplies
- Appliances
- Auxiliary Power Supplies
- Air Conditioning
- Small off-line low voltage power supplies
- AC--DC Adapter
- Smartphones
- Open Frame Switching Power Supply
- LED Driver
