UCC3813D-1
| Parameters | |
|---|---|
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC3813 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.075V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 500μA |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7.4V~12V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 46kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | BUCK-BOOST |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
UCC3813D-1 Overview
With a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. The pmic is packaged in Tube solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). dc controls with 7.4V~12V voltage are supplied and operated. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. Switching can be done at 46kHz with this switching controller. dc dc regulator can be generalized using Surface Mount. Frequency Control is used for efficient switching control in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. A variety of dc switching's functions can be performed on 8 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. There is a DC switcher's nominal voltage of 10V. Other relevant dc to dc converter ics can be found by searching "UCC3813". The switching converter has a total of 8 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. Statistically, DC regulator outputs 5.075V volts. In most cases, the dc dc regulator's output current is 200mA. This information should be noted when you begin working with the component. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. This Surface Mount makes DC switcher suitable for most prototypes and applications. The switching controller works at a frequency of 1MHz. Voltage 10V is required for supply. There should be 30mA current exceeding 30mA supplied to the controller. Switching voltage regulators' nominal current supply is 500μA.
UCC3813D-1 Features
Transistor Driver Outputs
Switching Frequency: 46kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC3813D-1 Applications
There are a lot of Texas Instruments UCC3813D-1 DC to DC converter applications.
- Sensitive electronic devices
- Production lines
- Electrical power transmission
- Smoke prevention equipment
- Medical equipment
- Energy management systems
- Precision electronic equipment
- Textile machinery
- Various precision measuring detectors
- Computer application technology
