UCC3813D-3

8 Terminals 3.6V~12V 8-Pin UCC3813 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 31kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC3813D-3
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 770
Description: 8 Terminals 3.6V~12V 8-Pin UCC3813 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 31kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	72.603129mg
Operating Temperature	0°C~70°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	10V
Frequency	1MHz
Base Part Number	UCC3813
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	4.06V
Output Type	Transistor Driver
Input Voltage-Nom	10V
Analog IC - Other Type	SWITCHING CONTROLLER
Nominal Supply Current	500μA
Output Configuration	Positive
Power Dissipation	650mW
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	3.6V~12V
Control Features	Frequency Control
Input Voltage (Min)	4V
Topology	Boost, Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	31kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	41ns
Supply Current-Max (Isup)	30mA
Synchronous Rectifier	No
Fall Time (Typ)	44 ns
Switcher Configuration	BUCK-BOOST
Max Duty Cycle	100 %
Duty Cycle (Max)	99%
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC3813D-3 Overview

This switching controller fits most application requirements since it is packaged in a 8-SOIC (0.154, 3.90mm Width) package. dc motor controller is suitable for 1 output generation. Packaging for the pmic consists of Tube solid enclosures. It is capable of handling Transistor Driver dc switching's outputs (s). Voltages 3.6V~12V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a 0°C~70°C TA dc switcher. In this switching controller, the switch can be set to 31kHz. dc dc regulator can be generalized using Surface Mount. DCDC regulator is controlled efficiently by Frequency Control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. A switching converters's terminal (s) sits at the DUAL position. There are many different types of terminations for 8. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 10V. Other relevant dc to dc converter ics will be returned if you search "UCC3813". Total pins of switching converter are 8. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the input voltage of the dc dc voltage regulator be 4V. Statistically, the DC regulator outputs 4.06V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 200mA. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controllers operate at 1MHz frequencies. Switching controller is necessary to provide a voltage of 10V. It is not recommended to supply more current to the controller than 30mA. This the controllers dc receives a 500μA nominal current supply.