UCC3813D-5

8 Terminals 3.6V~12V 8-Pin UCC3813 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 31kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC3813D-5
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 797
Description: 8 Terminals 3.6V~12V 8-Pin UCC3813 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 31kHz Transistor Driver (Kg)

Details

Tags

Parameters
Topology	Boost, Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	31kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	41ns
Supply Current-Max (Isup)	30mA
Synchronous Rectifier	No
Fall Time (Typ)	44 ns
Switcher Configuration	BUCK-BOOST
Max Duty Cycle	50 %
Duty Cycle (Max)	49%
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	72.603129mg
Operating Temperature	0°C~70°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	10V
Frequency	1MHz
Base Part Number	UCC3813
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	4.06V
Output Type	Transistor Driver
Input Voltage-Nom	10V
Analog IC - Other Type	SWITCHING CONTROLLER
Nominal Supply Current	500μA
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	3.6V~12V
Control Features	Frequency Control
Input Voltage (Min)	4V

UCC3813D-5 Overview

As a result of 8-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 1 outputs can be generated with the dc motor controller. There is a Tube solid enclosure around the pmic. The program can handle Transistor Driver dc switching's outputs (s). A 3.6V~12V voltage is supplied to the dc control and used for operating it. Suitable for a 0°C~70°C TA dc switcher. The switching controller is capable of switching at the 31kHz position. The Surface Mount allows it to be used for dc dc regulator in general. Frequency Control is used for efficient switching control in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminals (s) are designed at DUAL. A variety of terminations with 8 of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 10V. Searching "UCC3813" will return other relevant dc to dc converter ics. 8 pins are on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. Input voltage of dc dc voltage regulator should be 4V. Statistically, DC regulator outputs 4.06V volts. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. There is 1MHz frequency setting on the switching controller. There must be a voltage supply of 10V volts. Current supplied to the controller should not exceed 30mA. The nominal supply current for this the controllers dc is 500μA.