UCC3813N-0

8 Terminals 6.9V~12V 8-Pin UCC3813 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 46kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC3813N-0
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 466
Description: 8 Terminals 6.9V~12V 8-Pin UCC3813 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 46kHz Transistor Driver (Kg)

Details

Tags

Parameters
Terminal Position	DUAL
Supply Voltage	10V
Terminal Pitch	2.54mm
Frequency	1MHz
Base Part Number	UCC3813
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	5.075V
Output Type	Transistor Driver
Input Voltage-Nom	10V
Analog IC - Other Type	SWITCHING CONTROLLER
Nominal Supply Current	500μA
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	6.9V~12V
Control Features	Frequency Control
Input Voltage (Min)	7.5V
Topology	Boost, Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	46kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	41ns
Supply Current-Max (Isup)	30mA
Synchronous Rectifier	No
Fall Time (Typ)	44 ns
Switcher Configuration	BUCK-BOOST
Max Duty Cycle	100 %
Duty Cycle (Max)	99%
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Weight	523.190449mg
Operating Temperature	0°C~70°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS

UCC3813N-0 Overview

The switching controller fits in the 8-DIP (0.300, 7.62mm) package and is ideal for most applications. 1 outputs can be generated with the dc motor controller. PMIC packaging is solid with a Tube enclosure. The system can process Transistor Driver dc switching's outputs (s). Voltages 6.9V~12V are the dc control's supply voltage and operating voltage, respectively. Worked in a 0°C~70°C TA dc switcher before. A switching controller such as this can switch at a value of 46kHz . It is suitable for general dc dc regulator when it is set to Through Hole. To provide efficient switching control, Frequency Control is included in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminals (s) are designed at DUAL. An array of 8 terminations of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 10V. You can find other relevant dc to dc converter ics by searching "UCC3813". There are a total of 8 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 7.5V as the minimum input voltage of dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 5.075V. In most cases, the dc dc regulator's output current is 200mA. This information should be noted when you begin working with the component. voltage regulator dc to dcs with a 100 % duty cycle are designed to be reliable when powered on and powered off. As DC switcher has a Through Hole, it's suitable for most applications and prototype designs. 1MHz is the frequency of the switching controller. This voltage controller requires a supply voltage of 10V. It is important that the controller is supplied with 30mA more than 30mA volts of current. nominal current supply for this the controllers dc is 500μA.