UCC3813N-0G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Supply Voltage | 10V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | UCC3813 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 6.9V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 7.5V |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 46kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | BUCK-BOOST |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 99% |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3813N-0G4 Overview
It comes in the 8-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. It is sufficient to generate 1 outputs with this dc motor controller. Tube is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) can be handled by it. The supply and operating voltage of the dc control are 6.9V~12V. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. The switching controller is capable of switching at the 46kHz position. dc dc regulator is made easier with Through Hole. To ensure efficient switching, this dcdc regulator features a Frequency Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. Different dc switching's functions can be applied to 8 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 10V. Other relevant dc to dc converter ics can be found by searching "UCC3813". In total, switching converter has 8 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended to use 7.5V as the minimum input voltage of dc dc voltage regulator. DC regulator outputs 1V voltage based on test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 200mA. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. This Through Hole makes DC switcher suitable for most prototypes and applications. A frequency of 1MHz is set for the switching controller. Voltage 10V is required for supply. A controller's current should not exceed 30mA.
UCC3813N-0G4 Features
Transistor Driver Outputs
Switching Frequency: 46kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
UCC3813N-0G4 Applications
There are a lot of Texas Instruments UCC3813N-0G4 DC to DC converter applications.
- Electrical power transmission
- Scientific research
- Elevator lighting
- Grinders
- Magnetohydrodynamic power
- Flexible manufacturing cells
- Boring machines
- Telecommunications equipment
- Serial communication converter
- Energy management systems
