UCC3813N-5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Supply Voltage | 10V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | UCC3813 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 500μA |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 4V |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 31kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | BUCK-BOOST |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3813N-5 Overview
It comes in a 8-DIP (0.300, 7.62mm) package, so switching controller can be used for most applications. It is sufficient to generate 1 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) are supported. 3.6V~12V is the supply voltage and the operating voltage of the dc control. Suitable for a 0°C~70°C TA dc switcher. With this switching controller, you can switch at 31kHz. The Through Hole value makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a DUAL terminal on the switching converters. 8 terminations with a variety of function. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 10V. A search for "UCC3813" will reveal other relevant dc to dc converter ics. There are 8 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. 4V should be the minimum input voltage for the dc dc voltage regulator. Test statistics indicate DC regulator outputs 1V voltage. You should note down the dc dc regulator's usual output current of 200mA when you start a project. It is set to 50 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. This Through Hole makes DC switcher suitable for most prototypes and applications. 1MHz is the frequency of the switching controller. The supply voltage must be 10V. 30mA more than 30mA current should be supplied to the controller. The nominal current supply of this the controllers dc is 500μA.
UCC3813N-5 Features
Transistor Driver Outputs
Switching Frequency: 31kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC3813N-5 Applications
There are a lot of Texas Instruments UCC3813N-5 DC to DC converter applications.
- Remotely powered electric motors
- Computed tomography (CT)
- Electrical power transmission
- Shearing machines
- Game consoles
- Cutting machine tools
- Combined machine tools
- Overvoltage protection circuits in TV sets
- Photovoltaic power
- Digital display device
