UCC3813PW-2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC3813 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Operating Supply Voltage | 2.5V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 500μA |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9.3V |
| Topology | Boost, Buck, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | BUCK-BOOST |
| Internal Switch(s) | Yes |
| Max Duty Cycle | 100 % |
| Duty Cycle | 99% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 12.5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3813PW-2 Overview
There is a ac to dc converter embedded in package 8-TSSOP (0.173, 4.40mm Width) .You can get it in AC/DC power converter Tube .Surface Mount mounts this AC/DC converter.For the ac dc converter to perform properly, it should be operated at a temperature of -55°C~150°C TJ °C.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .This AC/DC converter is designed for use within the range of 8.3V~12V supply voltage (Vcc/Vdd).There are a total of 8 terminations.The ac/dc converter has a total of 8 pins.There are 8 pins on the ac-dc converter.It is suitable for mounting by Surface Mount .The UCC3813 family allows you to search for similar acdc converters.The number of outputs to run is 1 .The following ac to dc conversions are contained in Switching Regulator or Controllers .Currently, the output current is set to 1A .Its output voltage is1V .A high efficiency is achieved when operating at a frequency of 1MHz .During a 2.5V -voltage supply, the interface IC conducts.Keep in mind that this AC to DC converter should always be set to 10V .
UCC3813PW-2 Features
Packaged with 8-TSSOP (0.173, 4.40mm Width)
With 8 pins
Output Current at 1A
Operating Supply Voltage at the range of 2.5V
UCC3813PW-2 Applications
There are a lot of Texas Instruments UCC3813PW-2 AC DC Converters applications.
- Battery chargers for cellular phones
- Lighting controls
- Automotive Infotainment
- Set -Top Box (STB) Power Supply
- Battery Chargers
- AC/DC Adaptors/Chargers for PDAs
- Standby Power Supplies
- Utility meters
- LED Driver
- Power adapters for monitors
