UCC3813PWTR-0

8 Terminals 6.9V~12V 8-Pin UCC3813 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 46kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC3813PWTR-0
Package: 8-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 930
Description: 8 Terminals 6.9V~12V 8-Pin UCC3813 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 46kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173, 4.40mm Width)
Number of Pins	8
Operating Temperature	0°C~70°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	10V
Terminal Pitch	0.65mm
Frequency	1MHz
Base Part Number	UCC3813
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	1V
Output Type	Transistor Driver
Input Voltage-Nom	10V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	6.9V~12V
Control Features	Frequency Control
Input Voltage (Min)	7.5V
Topology	Boost, Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	46kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	41ns
Supply Current-Max (Isup)	30mA
Synchronous Rectifier	No
Fall Time (Typ)	44 ns
Switcher Configuration	BUCK-BOOST
Max Duty Cycle	100 %
Duty Cycle (Max)	99%
Height	1.2mm
Length	3mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC3813PWTR-0 Overview

It comes in the 8-TSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. 1 outputs can be generated with the dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. DC control operates at 6.9V~12V volts and has 6.9V~12V supply voltage. Qualified to work in an dc switcher with 0°C~70°C TA. The switching controller can be switched at 46kHz. dc dc regulator is made easier with Surface Mount. In order to control switching efficiently, the dcdc regulator features Frequency Control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. DUAL are the position of the terminal of the switching converters. A variety of terminations with 8 of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 10V. You can find other relevant dc to dc converter ics by searching "UCC3813". Switching converter has a total of 8 pins. The type is a particular Switching Regulator or Controllers of switching converter. An input voltage of 7.5V is the minimum required for the dc dc voltage regulator. Statistically, DC regulator outputs 1V volts. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. A frequency of 1MHz is set for the switching controller. Switching controller is necessary to provide a voltage of 10V. It is important that the controller is supplied with 30mA more than 30mA volts of current.