UCC38500DWG4
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 569.003279mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Frequency | 200kHz |
| Pin Count | 20 |
| Input Voltage-Nom | 12V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 18V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER WITH POST REGULATOR |
| Nominal Supply Current | 4mA |
| Input Voltage (Min) | 10.3V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1.2A |
| Frequency - Switching | 115kHz |
| Input Voltage (Max) | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BOOST |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC38500DWG4 Overview
As far as packaging is concerned, it comes in a SOIC package.Besides POWER FACTOR CONTROLLER WITH POST REGULATOR, there are other types of IC in this part.The gadget has a number of 20 terminals on the back of it.Pin number 20 remains unchanged.There is a switching frequency of 115kHz.20 pins are arranged in a sum.There is a minimum input voltage of 10.3V that can make it function properly.In a way, it can be considered as a subclass of Switching Regulator or Controllers.Its input voltage (Max) is 15V.With a frequency of 200kHz, it can continue to operate with good accuracy.In terms of output current, it works at the maximum in 1.2ACAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE is just one of the many features available.It should be warmer than 0°C?when operating.At this point, the maximum operating temperature is 70°C.You can only use it with a voltage supply of 18V volts.
UCC38500DWG4 Features
UCC38500DWG4 Applications
There are a lot of Texas Instruments UCC38500DWG4 PFC PMICs applications.
- TVS diodes
- Alternators
- Ultrasound
- Pumps
- LED lighting
- CPU power supply
- Low Noise Instrumentation
- xEV
- Telematics
- Automated test equipment
