UCC38502DWTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 569.003279mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Voltage - Supply | 9.7V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Frequency | 200kHz |
| Base Part Number | UCC38502 |
| Pin Count | 20 |
| Input Voltage-Nom | 12V |
| Supply Voltage-Max (Vsup) | 18V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER WITH POST REGULATOR |
| Input Voltage (Min) | 10.3V |
| Output Current-Max | 1.2A |
| Frequency - Switching | 100kHz |
| Input Voltage (Max) | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 4mA |
| Switcher Configuration | BOOST |
| Mode | Average Current |
| Current - Startup | 150μA |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC38502DWTR Overview
The package is 20-SOIC (0.295, 7.50mm Width)-shaped.There is a Tape & Reel (TR) package for this product.The device's mounting type is Surface Mount.In order to operate it, it should be connected to the voltage supply of 9.7V~18V.There is a setting on the device to operate at 0°C~70°C.Other IC types, such as POWER FACTOR CONTROLLER WITH POST REGULATOR, are present in the part.A number of 20 terminals can be found on the device.150μA represents the startup current.This component retains the pin number at 20 even though the pin number has been changed.One of the best parts of the device is the fact that it has a number of UCC38502.In this case, 100kHz is the switching frequency.There are 20 pins in this board, which make up its sum.Depending on the input voltage, it can operate at a minimum of 10.3V volts.In a way, it can be considered as a subclass of Switching Regulator or Controllers.15V is its maximum input voltage (Max).An accurate operation is possible with 200kHz as the frequency.In terms of output current, it works at the maximum in 1.2APower for the component is always provided by a 12V volt supply.Isup, the maximum supply current, shall not be more than 4mA.Other features include CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE, for example.
UCC38502DWTR Features
UCC38502DWTR Applications
There are a lot of Texas Instruments UCC38502DWTR PFC PMICs applications.
- Body control modules
- LCD backlight
- Aging system
- Ultrasound
- Communication device
- TVS diodes
- Analog datalogger
- Video equipment
- Personal communication device
- Car eCall
