UCC38503DWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 569.003279mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Voltage - Supply | 9.7V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Frequency | 200kHz |
| Base Part Number | UCC38503 |
| Pin Count | 20 |
| Input Voltage-Nom | 12V |
| Supply Voltage-Max (Vsup) | 18V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER WITH POST REGULATOR |
| Operating Supply Current | 4mA |
| Input Voltage (Min) | 10.3V |
| Output Current-Max | 1.2A |
| Frequency - Switching | 100kHz |
| Input Voltage (Max) | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BOOST |
| Mode | Average Current |
| Current - Startup | 150μA |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC38503DWG4 Overview
As far as packaging is concerned, it comes in a 20-SOIC (0.295, 7.50mm Width) package.It is packaged in a Tube way.Surface Mount is the mounting type of the device.With a voltage supply of 9.7V~18V, it should work.0°C~70°C is the device's operating mode.As well as POWER FACTOR CONTROLLER WITH POST REGULATOR ICs, the part has other IC types.Several 20 terminals are present on the gadget.150μA is the startup current.Pin number 20 remains the same for the component.One of the device's best parts is that it has a number of UCC38503 on it.The switching frequency is 100kHz.There are a total of 20 pins on it.Minimum input voltage 10.3V is needed to operate it.It's a subclass of Switching Regulator or Controllers in a way.It has a maximum input voltage (Max) of 15V.A frequency of 200kHz allows it to continue operating with a good level of accuracy.As far as output current is concerned, it works in 1.2AAs a rule of thumb, the component is always powered by a 12V volt supply.4mA is the supply current for this gadget.It should also be noted that there are other features, for example, CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE.
UCC38503DWG4 Features
UCC38503DWG4 Applications
There are a lot of Texas Instruments UCC38503DWG4 PFC PMICs applications.
- Noise filters
- Workstations
- Smart buildings
- ADAS (Advanced Driver-Assistance System)
- Medical Applications: Diagnostics and Imaging
- Bypass circuit
- Desktop microcomputer systems
- Home electric appliance
- Fans
- Car sunroof
