UCC3884NG4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Frequency | 750kHz |
| Base Part Number | UCC3884 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~15V |
| Control Features | Enable |
| Input Voltage (Min) | 8.8V |
| Topology | Buck, Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 30 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 81 % |
| Duty Cycle (Max) | 78% |
| Switching Frequency | 440kHz |
| Clock Sync | Yes |
| Height | 4.57mm |
| Length | 19.3mm |
| Width | 6.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC3884NG4 Overview
With a 16-DIP (0.300, 7.62mm) package, the switching controller is suitable for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. There is a Tube solid enclosure around the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. dc controls with 8.3V~15V voltage are supplied and operated. Worked in an dc switcher with a 0°C~70°C TA rating. The Through Hole allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Enable. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. Various 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 11V. Other relevant dc to dc converter ics will be returned if you search "UCC3884". There are only 16 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 8.8V. DC regulator outputs 500mV voltage according to the test statistics. You should note down the dc dc regulator's usual output current of 100mA when you start a project. The maximum duty cycle of this voltage regulator dc to dc is set to 81 % to ensure reliability during power-up and power-down. This Through Hole makes DC switcher suitable for most prototypes and applications. Switching controller operates at 750kHz Hz. 440kHz is the frequency at which this controller performs well most of the time.
UCC3884NG4 Features
Transistor Driver Outputs
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 81 %
Frequency: 750kHz
Switching Frequency: 440kHz
UCC3884NG4 Applications
There are a lot of Texas Instruments UCC3884NG4 DC to DC converter applications.
- Geothermal power
- Industrial robots
- Smoke exhaust equipment
- Shearing machines
- Precision electronic equipment
- Photovoltaic power
- Industrial controllers
- Arc suppression circuits
- Automatic plug-in machines
- Remotely powered electric motors
